Polymer Roof Factory
PO Box 200, Vernon VT 05354
Phone 802-257-2011 ▪ Fax 802-257-0846
www.polymer-roof-factory.com

E-Mail:
info@polymer-roof-factory.com

Manufacture and sales of Garage door, shed, and barn transom, ABS door and window canopy's,
octagon and round windows, and ABS roofs for bow and bay windows by Andersen & others.


Canopy Installation Instructions

All polymer canopy roofs are designed to be installed supported over a Bay or Garden window (see window instructions) or installed freestanding, as over a door, with a supporting soffit system.

This system can be purchased as an accessory or be built on site using plans provided.

All polymer canopies are designed to be installed with auxiliary trim casing provided by others. This trim casing is fastened to the bottom of the soffit system as shown here. Or the top of a window (not shown). The size of this piece is 1" x 2" but could be any size 1" x _ as per installers design, it could cover the entire soffit if desired.
  1. Install trim casing as shown above.

  2. Caulk surface of flashing and other nailing surfaces of roof where it meets soffit and building.

  3. Attach the canopy to the trim casing with screws supplied with roof.

  4. Attach the canopy to the building with galvanized nails using the holes provided in the flashing or pre-drlll a hole larger than the shank of the nail, leave room for expansion. Do not nail tight.

  5. Install siding, do not nail through the flashing.

  6. No other finishing of canopy is necessary and may void warranty.

  7. Care must be taken to insure that canopy soffits are installed securely so that they do not sag etc. The canopy roof is designed to provide style and weatherability. They are strong but are not designed to support themselves or the building components they protect.

03 June 2015

Previous  Next


HOMEABS POLYMER ROOFSWHAT ARE BOW AND BAY WINDOWSPOLYMER ROOFS FOR CASEMENT WINDOWSPOLYMER ROOFS FOR 30°DOUBLE HUNG WINDOWSPOLYMER ROOFS FOR 45°DOUBLE HUNG WINDOWSGENERAL APPLICATION INFORMATIONBAY ROOF INSTALLATION INSTRUCTIONSC3B AND C4B BOW ROOF INSTALLATION INSTRUCTIONSK BOW ROOF INSTALLATION INSTRUCTIONSSTOCK BOW AND BAY SPECIFICATIONSDOOR AND WINDOW CANOPY SPECIFICATIONSPLYWOOD SOFFIT KIT CANOPY INSTALLATION INSTRUCTIONSCANOPY SOFFIT INSTALLATION INSTRUCTIONSPRICING INFORMATIONSHIPPING CHARGESHOME

PDF Brochure: Polymer Window Roofs for Anderson Bay and Bow Windows
Print Version

Visit our corporate web site at:

www.firstlinesales.com


The information on this web site is believed to be accurate. The polymer roof factory will not be liable for errors and omissions. Specifications, details, and other information should be verified by the user. Last Updated 27 January 2010